Contact Us

Tel:+86-760-22357149

Fax:+86-760-22323133

Mob:+86-13798206445

E-mail: loyal@loyallighting.com

Add:Caosan Zhuwei Industry Zone, Guzhen Town, Zhongshan City, Guangdong Province, China. 528421

Home > News > Content
Panel Lights Are High-end Indoor Lighting Oct 27, 2017

Panel lamp instead of the traditional fluorescent lamp grille lamp is a good choice, it is not the traditional fluorescent lamp size of the length of the effect, not only can be used directly under the structure and side light guide structure, but also according to the designer's design into the building and Furniture display.

Panel lights is a high-end indoor lighting, the outer frame by the anodized aluminum alloy, the light source for the LED, Panel Light the entire design simple and beautiful lighting, atmospheric luxury, both good lighting.

 Panel lights unique design, light through the light transmittance of the light guide plate after the formation of a uniform flat light effect, illumination uniformity, light soft, comfortable and without losing the light, can effectively relieve eye fatigue. Panel lights can also prevent radiation, Panel Light will not stimulate pregnant women, the elderly, children's skin.

What is the panel lamp?

1. Panel light aluminum frame:

Is the main channel led cooling, the appearance of simple and generous, you can use the ZY0907, the use of mold stamping die low cost, processing costs are low; die-cast aluminum frame IP level can be higher, the surface texture is good, the overall appearance, Panel Light but the early put mold costs Higher.

2.led light source:

Usually led lamp beads use 3528, it was also used 3014 and 5050.3014 and 5050 low cost, light effect slightly worse, the key is its light guide network design difficulties. 3528 luminous efficiency high point of good versatility.

3.LED light guide plate:

The side of the LED light through the network refraction of the light from the front evenly derived, light guide plate is the key to the quality control panel lights. Network design is not good, Panel Light see the overall light effect is very poor, usually appear on both sides of the dark side of the dark, or there is a light band into the light, or visible local dark area, or there are different angles of inconsistency. To improve the light effect of the light guide plate mainly by the design of the network, followed by the quality of the plate, Panel Light but no need to superstition brand-name plate, qualified between the plate light transmission rate is usually almost the same. Panel Light General small LED lights factories are directly used to buy a common light guide plate, you do not need to re-proofing design, more manufacturers use the public version is usually qualified.

4.LED Diffusion Board:

The light guide plate light evenly derived, but also play a role in fuzzy network. Diffuse plate generally use the acrylic 2.0 sheet or PC material, almost the PS material, the lower the cost of acrylic and light transmission than the PC slightly higher, acrylic brittle anti-aging performance is weak, PC price is slightly more expensive, but anti-aging performance Strong. Panel Light Diffuse plate can not be seen after the installation of outlets, and the light transmission rate to about 90%. Acrylic transmittance at 92%, PC 88%, PS probably also 80%, we can according to the demand for the choice of diffusion board material, the majority of manufacturers are using acrylic materials.

5. Reflective paper:

The light guide plate on the back of the remaining light reflected to improve the luminous efficiency, usually RW250.

6. Rear cover:

The main role is to seal the panel lights, generally with 1060 aluminum, Panel Light but also play a little heat dissipation.

7. Drive power:

There are two kinds of led power supply, one is the use of constant current power supply, this mode is high efficiency, PF value of up to 0.95, cost-effective; second is the use of constant pressure with constant current power supply, stable performance, but low efficiency, high cost, This power is mainly exported, the other request for certification requirements, the need to use safety power. In fact, Panel Light the use of household constant current power supply is very safe, because users are difficult to access to power, and the lamp itself is the use of safe low voltage.

8. Install the pendant:

Suspension wire, mounting bracket, etc. for the installation of fixed accessories.

From the point of view of quality control, it is most effective to increase the light effect by adding additional money to the LED light source and the LED light guide plate. Panel Light From the point of view of the market sale, the additional money is spent on the aluminum frame cover pendant Can improve product quality.

Panel lights are widely used, there is now a substitute for the trend of grille; panel lights are mainly used in:

1, ceiling (instead of the original grille);

2, walls (not only as lighting purposes, but also with artistic expression);

3, the installation of the body (the pursuit of practical and artistic combination, easy to install);

4, other (also available in other places, Panel Light such as train cars or large mobile car body, counters, etc.);

Panel lights advantage

1. Compared with ordinary lamps, panel lights have higher luminous flux, monolithic and modular LED lamps are very popular, especially with the LED light efficiency continues to improve, the future of the panel lights more anticipated.

2. Color is good, lighting quality is guaranteed. Panel light using high-color phosphor package LED light source; Blu-ray hybrid package with red or amber chip, get high color light, Panel Light so it's high color rendering, color reproduction more real, more bright in the irradiation of items The

3. Good reliability Panel lights to LED as a light source, as a cold light source LED has an ordinary light source can not match the advantages, especially in terms of reliability, LED long life, low maintenance rate, excellent reliability.

4. Price return advantage. Although the price of panel lights is higher than ordinary lighting, but in the long run, shopping malls, supermarkets and other lighting places lighting a long time, lamps and more, Panel Light everlasting panel lights will save more electricity than ordinary lamps, and then from the maintenance Point of view, panel lamp longer life, panel lights at affordable prices, without frequent replacement, this maintenance is also an additional cost savings.